Frame Systems

Building needs differ according to style, functionality and cost. We offer a variety of framing systems that accommodate most if not all building requirements you have in mind.

Ferro Building Systems designs and provides frame systems to increments of 1/16 of an inch. Our frames are manufactured to exacting dimensions, with state of the art frame design software, in plants that are certified under the most stringent quality controlled environments in the industry today. Each is designed by experienced structural engineers, detailed to precise tolerances, and fabricated under the highest quality controlled plant process. Please review the following profiles to see which one best suits your needs.

RF SYSTEMS

Prefabricated Metal Rigid Frame System

RF SYSTEMS are the most economical in clear span and modular widths. The RF has a steep pitched roof slope ideal where high clearances are needed or desired in the center of the building.

RF - Rigid Frame
(High profile with by-pass girts)
Widths: 30' to 120'
Eave Heights: 10' to 24'
Roof Slope: 4:12
Bay Spacing: 20', 25', and 30'

LRFM SYSTEMS

LRFM Prefabricated Metal Frame System

LRFM SYSTEMS have all the features of the LRF series and, by adding interior columns, allow the system to span greater widths where one , two or up to five rows of interior columns are not a hindrance. An economical design, particularly practical for office, ware house, industrial and commercial applications.

LRFM
Widths: 80' to 160'
Eave Heights: 12' to 24'

Roof Slope: 1:12
Bay Spacings: 20' , 25' , and 30'

LP2 SYSTEMS

LP2 Prefabricated Metal Frame System

LP2 SYSTEMS offer straight wall columns and inset framed girts. The roof slope for a LP2 is 1/2:12. With the addition of interior columns this system can go up to 500' in width. The LP series can be used with bar joists or a jack beam to provide 30 or more feet of clear span interior floor space. This system is good for palletized storage or display racks and ideal for shopping centers and other commercial buildings.

LP2

Widths: 120' to 180'
Eave Heights: 14' to 24'
Roof Slope: 1/4:12 and 1/2:12
Bay Spacings: 20', 25' ,and 30'

GC SYSTEMS

GC Prefabricated Metal Frame System

GC SYSTEMS offer a 1:12 roof pitch, straight columns and typically have flush framed girts lending these structures well to interior finishing because the 8" deep girt is flush with the interior of the column. The rafter is horizontal on the bottom flange, also for ease of interior finishing.

GC
Widths : 30' to 80'
Eave Heights :10' to 24'
Roof slope: 1/4:12 and 1/2:12

Bay spacings: 20', 25' and 30'

LT SYSTEMS

LT Prefabricated Metal Frame System

LT SYSTEMS provide an economical means of making a building wider by utilizing this single slope system to extend the building roofline or attach to a lower level on the building to provide additional space for office or storage. Standard widths allow building additions from 10' to 60'.

LT

Widths: 20' to 50'
High Side Heights 10' to 24'
Roof Slope: Any bay spacing
Bay Spacings: 20' , 25' , and 30'

LRF SYSTEMS

LRF Prefabricated Metal Frame System

LRF SYSTEMS are the most economical in clear span and modular widths. The LRF frame offers clear span space up to 160' and, with the addition of interior columns; can go up to 500' in width. This system provides an economical solution for office, warehouse, industrial and commercial applications.

LRF
Widths: 30' to 160'
Eave Heights 10' to 30'
Roof Slope: 1:12
Bay Spacings: 20', 25' , and 30'

LSS SYSTEMS

LSS Prefabricated Metal Frame System

LSS SYSTEMS are low profile, single slope systems with by-pass girts. They offer up to 160' of clear span space and, with the addition of up to three interior columns, can go up to 320' in width. With single-side drainage they are suitable for manufacturing facilities, warehouses and retail shopping centers.

LSS
Widths: 60' to 100'

Eave Heights: 14' to 24'
Roof Slope: 1/4:12
Bay Spacings: 20' , 25' , and 30'

LP4 SYSTEMS

LP4 Prefabricated Metal Frame System

LP4 SYSTEMS offer straight wall columns and inset framed girts. The LP4 offers the lowest roof slope available @ - 1/4:12. With the addition of interior columns this system can go up to 500' in width. The LP series can be used with bar joists or a jack beam to provide 30 or more feet of clear span interior floor space. This system is good for palletized storage or display racks and ideal for shopping centers and other commercial buildings.

LP4
Widths: 160' to 240'
Eave Heights 14' to 24'
Roof Slope: 1/4:12 and 1/2:12
Bay Spacings : 20' , 25' , and 30'

SSF SYSTEMS

SSF Prefabricated Metal Frame System

SSF SYSTEMS have similar characteristics to the LSS Systems. They offer clear span floor space up to 60' wide and with one, two, or three interior columns and in widths from 40' up to 320'.

SSF
Single Slope Frame (with inset girts)
Widths: 30', 40', 50'

Eave Heights: 10' to 20'
Roof Slope: 1:48
Bay Spacing: 20', 25', and 30'


Call us for an estimate
1-866-443-3776