Wall Panels

The PBR panel’s deep ribs create an even-shadowed appearance. The area between the major ribs is reinforced with minor ribs. PBR is one of the most economical panel systems and can be used for both roof and wall applications.

Download a detailed spec.

• Gauge
  26 gauge (standard)
  24 gauge
  22 gauge
• Length
  45’ maximum length is standard but longer lengths are available by special request
• Finish
  Galvalume Plus®
  Signature® 200 Colors
  Signature® 300 Colors
• Dimensions
  36” x 1¼”
• Fasteners
  Standard coated, zinc- aluminum cast head, or stainless steel head screw
• Usage
  Roof, wall, liner, mansard, and soffit panel applications
• Limitations
  Not designed for coverage over bar joist or to be used as rigid secondary; five foot on center purlin spacing.

• Attributes
  1. Reverse rolled profile.
  2. Purlin bearing leg.
  3. Installation may start at either end.
  4. Economical profile.
  5. 36" coverage.
  6. Wind uplift rating.
  7. Diaphragm action.
  8. Light transmitting panels.
  9. Finish warranty.
• Advantages
  1. The panels can serve as an alternate wall panel by putting the paint finish on the under side.
  2. An additional leg is rolled on one side of lap rib to facilitate installation..
  3. Flexible installation.
  4. Panel qualifies for UL90 in multiple construction numbers.
  5. Ease of installation.
  6. The panel configuration enhances diaphragm capabilities for purlin stability.
  7. Used with long-life fasteners this panel has a 25 year warranty.
  8. Cost effective.
  9. See detailed specs HERE.

The Architectural "AVP" panel for side walls produces a decorative smooth shadow line, creating a distinctive architectural effect with semi-concealed fasteners. Ribs are 11/8" deep and major corrugations are spaced 12" on centre. The net converage of the panel is 3'-0".

Download a detailed spec.

• Gauge
  26 gauge (standard)
  24 gauge
• Length
  Maximum recommended length is 40'; longer lengths available by special order
• Finish
  Galvalume Plus®
  Signature® 200 Colors
  Signature® 300 Colors
• Dimensions
  36” x 1 1/8” deep
• Fasteners
  Standard coated, CAD plated or zinc- aluminum cast head fastener
• Usage
  Wall panel, liner panel and facade panel face
• Limitations
  Installation may be difficult with very thick insulation

• Attributes
  1. Semi-concealed fastener panel.
  2. Continuous eave to sill until exceeds 40'-0".
  3. Striations.
  4. Optional embossed texture.
  5. UL "Class A" fire rating.
• Advantages
  1. Attractive architectural application.
  2. Eliminating end laps improves appearance and enhances ease of installation.
  3. Reduces glare and potential for oil canning.
  4. Premium paint finishes with 25 year warranty.
  5. See detailed specs HERE.